Barium & Chemicals, Inc.

Safety Data Sheet
Revision: 0
Revision Date: 5/6/2015

 


1.) Identification
 
        Product Name: Strontium Oxide
        Product Number: ST1450
        Product Formula: SrO
 
        Manufacturer: Barium & Chemicals, Inc.
PO Box 218
515 Kingsdale Road
Steubenville, Ohio 43952-5218

Phone: 740-282-9776
Fax: 740-282-9161
Web: www.bariumchemicals.com

        Emergency Phone: Chemtrec 800-424-9300
        International: 703-527-3887

2.) HAZARDS IDENTIFICATION
Emergency Overview
OSHA Hazards
Corrosive
Target Organs
GHS Classifications
Skin Corrosion (Category 1B)
Serious eye damage (Category 1)
GHS Label Elements, Including Precautionary Statements
Pictogram
Signal Word     Danger
Hazard Statement(s)
H314 Causes severe skin burns and eye damage
 
Precautionary Statement(s)
P260 Do not breathe dust or mist
P264 Wash skin thoroughly after handling
P280 Wear protective gloves/protective clothing/eye protection / face protection
P301 + P330 + P331 IF SWALLOWED: rinse mouth DO NOT INDUCE VOMITING
P303 + P361 + P353 IF ON SKIN (or hair): Remove / Take off immediately all contaminated clothing. rinse skin with water / shower
P304 +P340 IF INHALED: Remove victum to fresh air and keep at rest in a position comfortable for breathing.
 
HMIS Classification
Health Hazard 3
Flammability 0
Physical Hazards 0
 
NFPA Rating
Health Hazard 3
Fire 0
Reactivity Hazard 0
 
Potential Health Effects
Inhalation May be harmful if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory track
Skin May be harmful if absorbed through skin. Causes skin burns
Eyes Causes eye burns
Ingestion May be harmful if swallowed

3.) INFORMATION ON INGREDIENTS
 
  EINECS PERCENT CAS NO:
215-219-9 100% 11314-11-0
  EINECS PERCENT CAS NO:

4.) FIRST AID MEASURES
 
Inhalation
If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.
Skin Contact
In case of skin contact, flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes.
Eye Contact
In case of contact with eyes, flush with copius amounts of water for at least 15 minutes. Assure adequate flushing by seperating the eyelids with fingers. Call a physician.
Ingestion Contact
If swallowed, wash out outh with water provided person is conscious. Call a physician immediately.

5.) FIRE FIGHTING MEASURES
 
Extinguishing Media
Suitable: Carbon dioxide. Dry chemical powder. Unsuitable: Do not use water.
Special Fire Fighting Procedures
Specific Hazard(s): Emits toxic fumes under fire conditions
Fire and Explosion Hazzards
Hazardous Combustion Products
Strontium Oxides formed under fire conditions
Protective Measure in Fire
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

6.) ACCIDENTAL RELEASE MEASURES
 
Personal Precaution in Spill
Wear-self-contained breathing apparatus, rubber boots, and heavy rubber gloves.
Environment
Do not allow contact with water.
Spill Clean Up
Sweep up, place in a bag and hold for waste disposal. Ventilate area wash spill site after material pickup is complete

7.) HANDLING AND STORAGE
 
Usage Precautions
Do not breath dust. Do not get in eyes, on skin, on clothing. Avoid prolonged or repeated expouser
Usage Descriptions
Provide appropriate exhaust ventilation at places where dust is formed. Normal measures for preventive fire protection.
Storage Precautions
Keep tightly closed. Store in cool dry place. Handle and store under nitrogen
Handling Precautions
Do not allow contact with water.

8.) EXPOSURE CONTORLS AND PERSONAL PROTECTION
 
Protective Equipment
Safety glasses, gloves, face shields and full-face particle respirator type N100 (US or type P3 (EN143).
Process Conditions
Use only in a chemical fume hood.
Respirators
Use respirators and componets tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment appropriate use a full-face type P3 (EN 143) respirator show air-purifying respirators and particle respirator type N100 (US) or cartidges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator.
Protective Gloves
Compatible chemical-resistant glove.
Eye Protection
Chemical safety goggles.
Other Protection
Hygienic Work Practices
Wash contaminated clothing before reuse. Discard contaminated shoes. Wash thoroughly after handling.

9.) PHYSICAL AND CHEMICAL PROPERTIES
 
a) Appearance (physical state, color, etc.)
White Solid
b) Odor
No data available
c) Odor threshold
d) pH
No data available
e) Melting Point/freezing point
No data available
f) Initial boiling Point and boiling range
No data available
g) Flash Point
No data available
h) Evaporation rate
i) Flammability (solid,gas)
j) Upper/lower flammability or explosive limits
k) Vapor pressure
l) Vapor density
m) Relative density
n) Solubility(ies)
No data available No data available
o) Partition coefficient: n-octanol/water
p) Auto-ignition temperature
q) Decomposition temperature
No data available
r) Viscosity
s) Specific Gravity
No data available

10.) STABILITY AND REACTIVITY
 
Stability
Stable
Hazardous Decomp Products
Nature of decomposition products not known. Under fire conditions - Strontium Oxides
Conditions to Avoid
Water

11.) TOXICOLOGICAL INFORMATION
 
Toxic Dose LD 50
No data available
Toxicological Info
No data available
Inhalation
May be harmful if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory tract.
Skin
Causes skin burns
Eyes
Causes eye burns
Medical Symptoms
Cough, Shortness of breath Headache, Nausea Vomiting

12.) ECOLOGICAL INFORMATION
 
Toxicity
No data available
Distribution
No data available
Chemical Fate
No data available

13.) DISPOSAL CONSIDERATIONS
 
Disposal Methods
Contact a liscensed professional waste disposal service to dispose of this material.
General Cleaning

14.) TRANSPORTATION INFORMATION
 
DOT - GROUND TRANSPORTATION
Proper Shipping Name
Corrosvie solid, basic, inorganic, NOS (Strontium Oxide)
Hazzard Class
8
UN Number
UN3262
Packing Group
II
IATA/IMDG REGULATIONS
Proper Shipping Name
Corrosvie solid, basic, inorganic, NOS (Strontium Oxide)
Hazzard Class
8
UN Number
UN3262
Packing Group
II
IMDG EMS
F-A, S-B
Shipping Options for this product include
UPS    FedEx    Plane    Truck    Boat    Rail

Transportation Notes NMFC 45615-4 - CL 110 HST# 2816.40.10.00


15.) REGULATORY INFORMATION
Chemical Inventory Status Part 1
Ingredient CASNO TSCA EINECS China Japan Austrialia
Strontium Oxide 11314-11-0 Yes Yes No Yes Yes

Chemical Inventory Status Part 2
Ingredient CASNO Korea DSL NDSL Phil.
Strontium Oxide 11314-11-0 Yes Yes No Yes

Federal, State, International Regulations- Part 1
Ingredient CASNO SARA 302
    RQ TPQ LIST
Strontium Oxide 11314-11-0 No No No
SARA 313

Federal, State, International Regulations- Part 2
Ingredient CASNO RCRA 261.33 TSCA 8(d) CERCLA
Strontium Oxide 11314-11-0 No No No

Additional Items
Chemical Weapons Convention Acute TSCA 12(b) CDTA SARA 311/312 Reactivity Chronic
No No No No No No No
Fire Pressure Austrialian HazChem Code Poison Schedule WHMIS
No No No No No

16.) MISC. INFORMATION
 
Information Sources
Revision Comments
Revised November 2012 for GHS Standards. Updated 2-19-2015 Revised February 2014 to align with internal document control
Other Information

17.) DISCLAIMER
 
Barium & Chemicals, Inc. provides this information as it relates only to the specific product designated herein. All information contained in this SDS should be provided to the user's employees and/or customers. The information contained herein relates only to the environmental, health and safety precautions for the product and is not intended to be relied upon as technical specifications for commercial or other purposes. Do not use the ingredient information and/or ingredient percentages in this SDS as product specification. For product specification refer to a Product Specification and/or a Certificate of Analysis provided by or requested from Barium & Chemicals, Inc. This information relates only to the product designated herein, and does not relate to its use in combination with any other material or in any other process. This information is intended only as a guide to the appropriate handling of the product by a properly trained person. Individuals receiving this information must exercise their independent judgment in determining its appropriateness for a a particular purpose. Conditions of use are beyond the control of Barium & Chemicals, Inc. Users are responsible to verify the applicability of this information under their own operating conditions to determine whether the product is suitable for a particular purpose and assume all risks of use, handling and disposal of the product, or from the publication, reliance upon or other use of the information contained herein. This information is furnished without warranty, expressed or implied;except that it is accurate to the best knowledge of Barium & Chemicals, Inc. and is based upon data obtained from the manufacturer and/or recognized technical sources. Barium & Chemicals, Inc. expressively disclaims all express or implied warranties of merchantability and fitness for a particular purpose, with respect to the product of information provided herein, and shall under no circumstances be liable for incidental or consequential damages. Barium & chemicals, Inc. assumes no responsibility for use, or reliance upon this information. Compliance with all applicable federal, state and local laws and regulations remains the responsibility of the user.