Barium & Chemicals, Inc.

Safety Data Sheet
Revision: 0
Revision Date: 8/23/2016

 


1.) Identification
 
        Product Name: Strontium Chloride Anhydrous
        Product Number: ST1151
        Product Formula: SrCl2
 
        Manufacturer: Barium & Chemicals, Inc.
PO Box 218
515 Kingsdale Road
Steubenville, Ohio 43952-5218

Phone: 740-282-9776
Fax: 740-282-9161
Web: www.bariumchemicals.com

        Emergency Phone: Chemtrec 800-424-9300
        International: 703-527-3887

2.) HAZARDS IDENTIFICATION
Emergency Overview
OSHA Hazards
Irritant
Target Organs
GHS Classifications
GHS Label Elements, Including Precautionary Statements
Pictogram
Signal Word     Danger
Hazard Statement(s)
H315 Causes skin irritation
H318 Causes serious eye damage
H335 May cause respiratory irritation
H412 Harmful to aquatic life with long lasting effects
 
Precautionary Statement(s)
P261 Avoid breathing dust/fume/gas/mist/vapours/spray
P264 Wash skin thoroughly after handling
P271 Use only outdoors or in a well-ventilated area
P273 Avoid release to the environment
P280 Wear protective gloves/protective clothing/eye protection / face protection
P305 / P351 / P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing
 
HMIS Classification
Health Hazard 2
Flammability 0
Physical Hazards 0
 
NFPA Rating
Health Hazard 2
Fire 0
Reactivity Hazard 0
 
Potential Health Effects
Inhalation May be harmful if inhaled Causes respiratory tract irritation
Skin May be harmful if absorbed through skin. Causes skin irritation
Eyes Causes eye irritation
Ingestion May be harmful if swallowed

3.) INFORMATION ON INGREDIENTS
 
  EINECS PERCENT CAS NO:
233-971-6 99-100% 10467-85-4
  EINECS PERCENT CAS NO:

4.) FIRST AID MEASURES
 
Inhalation
Remove to fresh air. Get medical attention for any breathing difficulty.
Skin Contact
Immediately flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical aid if irritation develops.
Eye Contact
Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.
Ingestion Contact
Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice. Do not induce vomiting unless directed by physician

5.) FIRE FIGHTING MEASURES
 
Extinguishing Media
Substance is non combustable. Use agent most appropriate to extinguish surrounding fire
Special Fire Fighting Procedures
Not considered to be a fire hazard.
Fire and Explosion Hazzards
Not considered to be an explosion hazard.
Hazardous Combustion Products
No information found.
Protective Measure in Fire
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6.) ACCIDENTAL RELEASE MEASURES
 
Personal Precaution in Spill
Wear appropriate personal protective equipment as specified in Section 8.
Environment
Ventilate area of leak or spill. Do not allow product to enter drains
Spill Clean Up
Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust.

7.) HANDLING AND STORAGE
 
Usage Precautions
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Usage Descriptions
Provide adequate exhaust ventilation at places where dust if formed.
Storage Precautions
Keep containers tightly closed
Handling Precautions
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

8.) EXPOSURE CONTORLS AND PERSONAL PROTECTION
 
Protective Equipment
A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Process Conditions
OSHA Permissible Exposure Limit (PEL): 15 mg/m3 total dust, 5 mg/m3 respirable fraction for nuisance dusts. - ACGIH Threshold Limit Value (TLV): 10 mg/m3 total dust containing no asbestos and < 1% crystalline silica for Particulates Not Otherwise Classified (PNOC).
Respirators
If the exposure limit is exceeded and engineering controls are not feasible, a half face piece particulate respirator (NIOSH type N95 or better filters) may be worn for up to 10 times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerine, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Protective Gloves
Wear protective gloves
Eye Protection
Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
Other Protection
Wear clean body-covering clothing.
Hygienic Work Practices
No information found.

9.) PHYSICAL AND CHEMICAL PROPERTIES
 
a) Appearance (physical state, color, etc.)
White or colorless granules or crystals
b) Odor
No data available
c) Odor threshold
No data available
d) pH
No data available
e) Melting Point/freezing point
874 C (1605 F) lit.
f) Initial boiling Point and boiling range
No data available
g) Flash Point
Not applicable
h) Evaporation rate
No data available
i) Flammability (solid,gas)
No data available
j) Upper/lower flammability or explosive limits
No data available
k) Vapor pressure
No data available
l) Vapor density
No data available
m) Relative density
3 g/ml @ 25C (77F)
n) Solubility(ies)
soluble No data available
o) Partition coefficient: n-octanol/water
No data available
p) Auto-ignition temperature
No data available
q) Decomposition temperature
No data available
r) Viscosity
No data available
s) Specific Gravity
No data available

10.) STABILITY AND REACTIVITY
 
Stability
Stable under ordinary conditions of use and storage.
Hazardous Decomp Products
Oxides of the contained metal and halogen, possibly also free, or ionic halogen.
Conditions to Avoid
Moisture and strong oxidizing agents.

11.) TOXICOLOGICAL INFORMATION
 
Toxic Dose LD 50
Intraperitoneal - mouse - 1,352 mg/kg
Toxicological Info
No information provided
Inhalation
No data available
Skin
Rabbit - no skin irritation
Eyes
Rabbit - Severe eye irritation
Medical Symptoms
Vomiting, Diarrhea, Abdominal pain

12.) ECOLOGICAL INFORMATION
 
Toxicity
No data available
Distribution
No data available
Chemical Fate
No data available

13.) DISPOSAL CONSIDERATIONS
 
Disposal Methods
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
General Cleaning

14.) TRANSPORTATION INFORMATION
 
DOT - GROUND TRANSPORTATION
Proper Shipping Name
Not regulated
Hazzard Class
Not regulated
UN Number
Not regulated
Packing Group
Not regulated
IATA/IMDG REGULATIONS
Proper Shipping Name
Not regulated
Hazzard Class
Not regulated
UN Number
Not regulated
Packing Group
Not regulated
IMDG EMS
Not regulated
Shipping Options for this product include
UPS    FedEx    Plane    Truck    Boat    Rail

Transportation Notes NMFC 43940-2 -- CLASS 85 HST 2827.39.90.00


15.) REGULATORY INFORMATION
Chemical Inventory Status Part 1
Ingredient CASNO TSCA EINECS China Japan Austrialia
Strontium Chloride Anhydrous 10467-85-4 Yes Yes No Yes Yes

Chemical Inventory Status Part 2
Ingredient CASNO Korea DSL NDSL Phil.
Strontium Chloride Anhydrous 10467-85-4 Yes Yes No Yes

Federal, State, International Regulations- Part 1
Ingredient CASNO SARA 302
    RQ TPQ LIST
Strontium Chloride Anhydrous 10467-85-4 No No No
SARA 313
No information found.

Federal, State, International Regulations- Part 2
Ingredient CASNO RCRA 261.33 TSCA 8(d) CERCLA
Strontium Chloride Anhydrous 10467-85-4 No No No

Additional Items
Chemical Weapons Convention Acute TSCA 12(b) CDTA SARA 311/312 Reactivity Chronic
No Yes No No No No No
Fire Pressure Austrialian HazChem Code Poison Schedule WHMIS
No No No No No

16.) MISC. INFORMATION
 
Information Sources
Revision Comments
Revised November 2012 for GHS Standards. Updated 2-19-2015 Revised February 2014 to align with internal document control Updated 8-23-2016
Other Information

17.) DISCLAIMER
 
Barium & Chemicals, Inc. provides this information as it relates only to the specific product designated herein. All information contained in this SDS should be provided to the user's employees and/or customers. The information contained herein relates only to the environmental, health and safety precautions for the product and is not intended to be relied upon as technical specifications for commercial or other purposes. Do not use the ingredient information and/or ingredient percentages in this SDS as product specification. For product specification refer to a Product Specification and/or a Certificate of Analysis provided by or requested from Barium & Chemicals, Inc. This information relates only to the product designated herein, and does not relate to its use in combination with any other material or in any other process. This information is intended only as a guide to the appropriate handling of the product by a properly trained person. Individuals receiving this information must exercise their independent judgment in determining its appropriateness for a a particular purpose. Conditions of use are beyond the control of Barium & Chemicals, Inc. Users are responsible to verify the applicability of this information under their own operating conditions to determine whether the product is suitable for a particular purpose and assume all risks of use, handling and disposal of the product, or from the publication, reliance upon or other use of the information contained herein. This information is furnished without warranty, expressed or implied;except that it is accurate to the best knowledge of Barium & Chemicals, Inc. and is based upon data obtained from the manufacturer and/or recognized technical sources. Barium & Chemicals, Inc. expressively disclaims all express or implied warranties of merchantability and fitness for a particular purpose, with respect to the product of information provided herein, and shall under no circumstances be liable for incidental or consequential damages. Barium & chemicals, Inc. assumes no responsibility for use, or reliance upon this information. Compliance with all applicable federal, state and local laws and regulations remains the responsibility of the user.